RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
10. Remove the tape or plugs from the opened accumulator tube.
11. Lubricate new rubber O-ring seals with clean refrigerant oil and install them onto the accumulator tube fitting. Use only the specified O-rings as
they are made of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
12. Connect the A/C suction line (6) to the spring-lock coupler (1) on the A/C accumulator (5) and install the secondary retaining clip (7).
13. Install the air filter housing cove.
14. Reconnect the negative battery cables.
15. Evacuate the refrigerant system.
16. Adjust the refrigerant oil level.
17. Charge the refrigerant system.
