RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. Disconnect and isolate the battery negative cable.
2. Using a small thin-bladed screwdriver, gently pry between each side of the lamp lens and the overhead console housing (1) to unsnap the pivot
tabs (3) on the lens from the pivots in the lamp housing.
3. With the lens disengaged from both pivots, pull the front of the lens forward far enough to disengage the tab (2) on the rear edge of the lens from
the slot in the rear of the overhead console lamp housing.
4. Remove the lens from the housing.
5. Carefully unsnap the bulb (2) from the two bulb holders (1) within the overhead console lamp housing.