RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Transmission Fill
TRANSMISSION FILL
To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
1. Remove dipstick and insert clean funnel in transmission fill tube.
2. Add following initial quantity of Mopar(R) AS68RC ATF to transmission:
a. If only fluid and filter were changed, add 6.8L (7.2 quarts) of AS68RC to transmission.
b. If transmission was completely overhauled and the torque converter was replaced or drained, add 13L (13.75 quarts) of Mopar(R) AS68RC
ATF to transmission.
3. Check the transmission fluid and adjust as required.
