RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Evaporator Temperature Sensor / Switch: Service and Repair
Removal
REMOVAL
NOTE: Illustration shown with instrument panel removed for clarity.
1. Disconnect and isolate the negative battery cable.
2. Remove the glove box from the instrument panel.
3. Disconnect the HVAC wire harness (1) from the evaporator temperature sensor (2) located on the top of the HVAC housing (3).
4. Remove the evaporator temperature sensor from the HVAC housing by pulling the sensor upward while tipping it forward.