RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Installation
5.9L/6.7L DIESEL
ECT LOCATION - 6.7L DIESEL
1. Install sensor (1 or 3) to engine.
2. Tighten sensor to 18 Nm (13 ft. lbs.) torque.
ECT LOCATION - 5.9L DIESEL
3. Connect electrical connector (2) to ETC sensor (1 or 3).
4. Install heat shield (if equipped).
5. Replace any lost engine coolant.
