RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Exhaust Pressure Differential Sensor: Service and Repair
Installation
INSTALLATION
1. Install differential pressure tubing, if removed. Tighten fittings to 30 Nm (22 ft. lbs.).
2. Position differential pressure sensor (1).
3. Install mounting nuts (5) and bolts. Tighten to 10 Nm (89 in. lbs.).
4. Install hose (2) to the rear DPF tubing.
5. Install hose (3) to the front DPF tubing.
6. Connect electrical connector (6).
7. Lower vehicle.
