RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Control Arm Bushing: Service and Repair
Installation
Upper Control Arm Bushings - IFS (HD)
UPPER CONTROL ARM BUSHINGS - IFS (HD)
1. Install the bushing (3) into the control arm (5) using special tool C-4212F (PRESS) (1), 9770-1 (receiver) (2) and 9777-1 (driver) (4).
2. Remove the control arm from the vise.
3. Install the upper control arm.
4. Perform a wheel alignment.
Lower Control Arm Shock Bushing - IFS 4X4
LOWER CONTROL ARM SHOCK BUSHING - IFS 4X4
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
1. Install the new shock bushing (3) into the lower control arm (4) using tools C-4212-F (Press) (1), 9653-3 (driver) (2), 9773 (Receiver) (5) will
automatically set the depth of the bushing in the control arm.
