RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Front Steering Knuckle: Service and Repair
Front - Independent Front Suspension
Removal
(LD) 4X2 & 4X4
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, rotor, shield and ABS wheel speed sensor if equipped.
4. Remove the tie rod end nut. Separate the tie rod from the knuckle with Remover 9360.
5. Remove the halfshaft nut (4X4 only).
6. Remove the upper ball joint nut. Separate the ball joint (4) from the knuckle (6) with Remover 9360 (5)
