RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Torque Converter: Service and Repair
AS68RC Automatic Transmission
Removal
REMOVAL
1. Remove transmission from vehicle.
2. Place a suitable drain pan under the converter housing end of the transmission.
WARNING: Be certain the transmission is secure when removing the torque converter, the torque converter is very heavy. Failure to
follow these instructions may result in personal injury or may be fatal.
TC REMOVAL
3. Pull the torque converter forward until the center hub clears the oil pump seal.
4. Separate the torque converter from the transmission.
Installation
INSTALLATION
NOTE: Check converter hub and drive flats for sharp edges, burrs, scratches, or nicks. Polish the hub and flats with 800/10000 grit paper or
crocus cloth if necessary. Verify that the oil pump seal is properly installed and is free from debris. The hub must be smooth to avoid damaging
the pump seal at installation.
TC REMOVAL
