RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Universal Joint: Service and Repair
Installation
INSTALLATION
CAUTION: Keep cross and bearing cap straight during installation. Failure to follow these instruction will result in damage.
1. Pack bearing caps 1/3 full of wheel bearing lubricant. Apply extreme pressure (EP), lithium-base lubricant to aid in installation.
2. Position cross (1) in the shaft yoke (2).
3. Tap bearing cap into the yoke bores far enough to position cross.
4. Position receiver/socket (1) on shaft yoke and driver/socket (2) on bearing cap in press.
