dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Brakes - Accelerated Front Vs. Rear Lining Wear|Page 5767 > < Brake Caliper|Removal and Installation|Page 5758
Page 1
background image

Technical Service Bulletin # 050497

Date: 970328

Brakes - Accelerated Front Vs. Rear Lining Wear

NO: 05-04-97

GROUP: Brakes

DATE: Mar. 28, 1997

SUBJECT: 
Accelerated Brake Lining Wear, Front Versus Rear

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 05-02-96 REV. A, DATED NOV. 15, 1996, WHICH SHOULD BE
REMOVED FROM YOUR FILES AND NOTED IN THE 1996 TECHNICAL SERVICE BULLETIN MANUAL (PUBLICATION NO.
81-699-97010). THIS BULLETIN INCORPORATES THE USE OF REVISED BRAKE LININGS FOR VEHICLES EQUIPPED WITH 80MM
FRONT CALIPERS. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS**.

MODELS: 
1994-1997 (BR) Ram Trucks

NOTE

THIS BULLETIN APPLES TO 2500 SERIES AND 3500 SERIES RAM TRUCKS.

SYMPTOM/CONDITION:

Front brake linings wear prematurely when compared to the wear experienced on the rear brake linings. Normally, it is expected that the front brake
linings will require replacement approximately twice before the rear lining assemblies will need replacement. The accelerated wear condition can be
identified by requiring the front brake linings to be replaced four to six times before the rear lining assemblies are replaced.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

Install Front Brake Linings
05-70-24-92

0.6 Hrs.

Install Rear Wheel Cylinder on 2500 Series, 8800 GVW Vehicles
05-90-50-92

1.1 Hrs.

Install Rear Brake Shoes on 3500 Series Vehicles
05-70-07-90

0.7 Hrs.

Related Operation:

Dual Rear Wheels
05-70-07-92/93

0.2 Hrs.

FAILURE CODE:

P8 - New Part

Diagnosis

1.

Review service history to determine if front brake lining wear has been accelerated, typically 3 to 4 times as often as the rear brake linings.

2.

If the vehicle is a 2500 series, 8800 GVW, and is operated continuously near the Gross Vehicle Weight Ratings, have the vehicle weighed to
determine if the loaded condition is at 75% or greater of the gross vehicle weight rating.

3.

Visually inspect both front and rear brake assemblies for any signs of abnormal wear, abuse or mis-assembly of components. Refer to the
appropriate Service Manual, Group 5, for information regarding service of braking components if the brake assemblies show signs of abnormal
wear, abuse or mis-assembly of components.

4.

If the front brake pads are evenly worn with the rear brake linings indicating light wear, perform the following Repair Procedure.

Parts Required

**AR

(1)

05003163AA

80 mm Front Brake Lining Set, 2500 Series, 7500 GVW (All) 
And 8800 GVW 4X2**

AR

(1)

04886279AA

86 mm Front Brake Lining Set, 2500 Series, 8800 GVW, 4X4 
And All 3500 Series Vehicles

Brakes - Accelerated Front Vs. Rear Lining Wear|Page 5767 > < Brake Caliper|Removal and Installation|Page 5758