RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
1. Install module on HCU.
2. Position HCU on mounting studs.
3. Install and tighten mounting bolt and stud nuts. Tighten bolts and nuts to 10-13 Nm (7-10 ft. lbs.).
4. Connect ABS harnesses to HCU and CAB. Be sure CAB harness is securely latched in place.
5. Connect brake lines to HCU and tighten line fittings to 19-23 Nm (14-17 ft. lbs.).
6. Fill and bleed brake system. See: Brake Bleeding/Service and Repair