RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Air Door Cable: Service and Repair
Fig 43 Temperature Control Cable (Heater-A/C Housing End)
REMOVAL
1. Lower the steering column and roll down the instrument panel.
2. Disconnect the temperature control cable from the top of the heater-A/C housing.
3. Remove the heater-A/C control.
Fig 44 Temperature Control Cable (Heater-A/C Control End)
4. Disconnect the temperature control cable from the beater-AC control.
INSTALLATION
1. Connect the temperature control cable to the heater-A/C control.
2. Install the heater-A/C control.
3. Connect the temperature control cable to the top of the heater-A/C housing.
4. Install the instrument panel and raise the steering column.
