RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Headlamp Bulb: Service and Repair
On driver side and on vehicles with dual batteries, the headlamp assembly must be removed to service the headlamp bulb.
REMOVAL
1. Release hood latch and open hood.
2. To remove headlamp assembly on drivers side or passenger side when equipped with dual batteries.
3. Disengage wire connector from headlamp bulb.
Headlamp Bulb Removal
4. Remove retaining ring holding bulb to headlamp.
5. Pull bulb from headlamp.
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
1. Position bulb in headlamp.
2. Install retaining ring holding bulb to headlamp.
3. Connect wire connector to headlamp bulb.
