RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Map Light Bulb: Service and Repair
Reading Lamp and Courtesy Lamp Bulb
REMOVAL and INSTALLATION
1. Insert a long, narrow, flat-bladed tool at the notch on the curved edge of the reading and courtesy lamp lens. Carefully pry the lens downward from
the overhead console housing and pivot the lens down. It may be necessary to move the tool along the edge of the lens to free the lens from the
console housing.
2. Remove the bulb by pulling it straight down from the lamp socket.
3. Install a new bulb by pushing it firmly into the lamp socket.
4. Pivot the lens up into position and press upwards until the lens snaps back into the overhead console housing.
5. Test the lamp by depressing the lens to check for proper lamp switching and lighting.