RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Steering and Suspension Inspection, and
Steering Geometry Evaluation (Alignments)
05-01-01-91
0.7 Hrs.
Correcting Thrust Angle
05-01-01-92
1.9 Hrs.
Install Alignment Sleeves
Optional Equipment:
**22-01-01-90**
0.2 Hrs.
Dual Rear Wheels
Additional Repairs As Required:
02-10-10-90
1.7 Hrs.
Perform Ball Joint Tightening Sequence
02-10-10-91
3.0 Hrs.
Replace Ball Joints and Perform Tightening
Sequence
22-45-02-91
0.6 Hrs.
Install 3.5 mm Shim On Opposite Side Of Drift
And Road Test
22-45-02-92
0.6 Hrs.
Remove 3.5 mm Shim And Install 5.0 mm Shim
And Road Test
22-45-02-93
1.6 Hrs.
Remove 5.0 mm Shim, Replace Wheel Studs, Install
6.5 mm Shim, And Road Test On 1500 Series Trucks
22-45-02-94
2.0 Hrs.
Remove 5.0 mm Shim, Replace Wheel Studs, Install
6.5 mm Shim, And Road Test On 2500/3500 Series
Trucks With Single Rear Wheels
22-45-02-95
1.5 Hrs.
Remove 5.0 mm Shim, Replace Wheel Studs, Install
6.5 mm Shim, And Road Test On 2500/3500 Series
Trucks With Dual Rear Wheels
**02-10-76-94
2.6 Hrs.
Replace upper and lower suspension arms, align
the front suspension, and road test**
FAILURE CODE:
XX - Service Adjustment
