RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Crankshaft Position Sensor: Description and Operation
Circuit Operation
CIRCUIT OPERATION
The Powertrain Control Module (PCM) supplies 5 Volts to the crankshaft position sensor on circuit K6. Circuit K6 connects to cavity A17 of the
PCM.
The PCM receives the crankshaft position sensor signal on circuit K24. Circuit K24 connects to cavity A8 of the PCM.
The PCM provides a ground for the crankshaft position sensor (circuit K24) through circuit K4. Circuit K4 connects to cavity A4 of the PCM
connector.
