RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Canister Purge Solenoid: Service and Repair
EVAP Purge Solenoid
REMOVAL
1. Remove air filter housing assembly.
2. Disconnect wiring connector at solenoid.
3. Disconnect vacuum harness at solenoid.
4. Remove two solenoid mounting bracket bolts at the intake manifold.
5. Remove solenoid from mounting bracket (snaps off).
INSTALLATION
1. Snap the solenoid onto the mounting bracket.
2. Install the solenoid/mounting bracket assembly to the intake manifold.
3. Connect the vacuum harness at solenoid.
4. Connect wiring harness at solenoid.
5. Install the air filter housing assembly.