RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Electronic Brake Control Module: Service and Repair
Four Wheel Antilock Brake System
REMOVAL
1. Remove and isolate negative battery cable.
CAB Harness Connector
2. Release Controller antilock Brake (CAB) connector locking handle and remove connector.
3. Remove the 2 CAB mounting bolts and remove CAB from bracket.
INSTALLATION
1. Install CAB in mounting bracket.
2. Install mounting bolts.
3. Connect harness and lock into place with locking handle.
4. Install negative battery cable.
