RAM 2500 Truck 4WD V10-8.0L VIN W (1997)
Electronic Brake Control Module: Service and Repair
Rear Wheel Antilock Brake System
Knee Bolster
REMOVAL
1. Remove screws from knee bolster attached to panel flange.
RWAL Module Lower Attaching Screws
2. Remove module lower attaching screws. Screws are partially hidden by air duct but can be removed with long shank, number 2 Phillips
screwdriver as shown above.
RWAL Module Upper Attaching Screw
3. Remove module upper attaching screw.
4. Remove module and bracket from underside of instrument panel.
