dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 7734 > < Diagram Information and Instructions|Page 7732
Page 2
background image

OVERHEAD CONSOLE 

The overhead consoles for this model include two front-mounted reading and courtesy lamps, a garage door opener storage bin, and a sunglasses
storage bin. The premium overhead console includes a Compass Mini-Trip Computer. The base overhead console uses the same overhead console
housing, but has a computer cover plug installed in place of the Compass Mini-Trip Computer display module lens and push buttons.

The rear of the overhead console is secured to two rear mounting holes in the inner roof panel by two plastic hook formations that are integral to
the overhead console housing. The front of the overhead console is secured to the two front mounting holes of the inner roof panel by two plastic
latches that are integral to the overhead console housing. A single electrical connection joins the overhead console wire harness to the roof wire
harness for both the base and premium overhead console units.

Following are general descriptions of the major components used in the overhead console. See the owner's manual in the vehicle glove box for
more information on the use and operation of the various overhead console features.

COMPASS MINI-TRIP COMPUTER

The Compass Mini-Trip Computer is located in the premium overhead console on models equipped with this option. Two Compass Mini-Trip
Computer units are available. One unit is used on vehicles not equipped with the Vehicle Theft Security System (VTSS) option, and the other is
used on vehicles with the VTSS option. Both Compass Mini-Trip Computer units include the electronic control module, a Vacuum-Fluorescent
Display (VFD), a compass flux-gate unit and two push button function switches.

Compass Mini-Trip Computer units for vehicles equipped with the VTSS include a red Light-Emitting Diode (LED) on their electronic circuit
board. This LED protrudes through the bottom of the lens on the front of the overhead console unit, and serves as the security indicator lamp.
Refer to Security Indicator Lamp in the Description and Operation of  Vehicle Theft/Security Systems for more information on this feature.

The Compass Mini-Trip Computer module contains a central processing unit and interfaces with other electronic modules in the vehicle on the
Chrysler Collision Detection (CCD) data bus network. The CCD data bus network allows the sharing of sensor information. This helps to reduce
wire harness complexity, reduce internal controller hardware, and reduce component sensor current loads. At the same time, this system provides
increased reliability, enhanced diagnostics, and allows the addition of many new feature capabilities.

The Compass Mini-Trip Computer provides several electronic functions and features. Some of the functions and features that the Compass
Mini-Trip Computer module supports and/or controls, include the following display options:

-

Compass and Temperature - provides the outside temperature and one of eight compass readings to indicate the direction the vehicle is
facing.

-

Compass and Compass in Degrees - provides one of eight compass readings to indicate the direction the vehicle is facing and provides the
compass direction in degrees.

-

Trip Odometer (ODO) - shows the distance travelled since the last trip computer reset.

-

Average Fuel Economy (AVG ECO) - shows the average fuel economy since the last trip computer reset.

-

Instant Fuel Economy (ECO) - shows the present fuel economy based upon the current vehicle distance and fuel used information.

-

Distance To Empty (DTE) - shows the estimated distance that can be travelled with the fuel remaining in the fuel tank. This estimated
distance is computed using the average miles-per-gallon from the last 30 gallons of fuel used.

-

Elapsed Time (ET) - shows the accumulated ignition-on time since the last trip computer reset.

-

Blank Screen - the Compass Mini-Trip Computer VFD is turned off.

The ambient temperature sensor is hard wired to the Compass Mini-Trip Computer module. Data input for all other Compass Mini-Trip Computer
functions, including VFD dimming level, is received through CCD data bus messages. The Compass Mini-Trip Computer uses its internal
programming and all of these inputs to calculate and display the requested data. If the data displayed is incorrect, perform the self-diagnostic tests.
If these tests prove inconclusive, the use of a DRB III scan tool and the proper Diagnostic Procedures are recommended for further testing of the
Compass Mini-Trip Computer module and the CCD data bus.

The Compass Mini-Trip Computer module cannot be repaired, and is available for service only as a unit. If faulty or damaged, the complete
module must be replaced.

COMPASS

While in the compass/temperature mode, the compass will display the direction in which the vehicle is pointed using the eight major compass
headings (Examples: north is N, northeast is NE), along with the outside ambient temperature. When the compass unit is placed in the
compass/compass in degrees mode, the compass will display the direction the vehicle is heading using the eight major compass headings and in
degrees (0 to 359 degrees). North is 0 degrees, East is 90 degrees, South is 180 degrees and West is 270 degrees. It will not display the headings
in minutes or seconds.

Diagram Information and Instructions|Page 7734 > < Diagram Information and Instructions|Page 7732