RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REMOVAL
1. Disconnect the negative cable from the battery.
2. Remove the Cooling system fan, accessory drive belt and radiator.
3. Remove crankshaft pulley/damper bolt and washer from end of crankshaft.
Fig. 52
4. Using Special Tool, 1026 3 Jaw Puller and Special Tool 8513 Insert, remove pulley-damper from the crankshaft (Fig. 52).
5. Inspect crankshaft oil seal. If damaged or worn, replace the oil seal.
INSTALLATION
1. Position the crankshaft pulley/damper onto the crankshaft.
Fig. 53
2. Use Special Tool, C-3688 Crankshaft Pulley/ Damper Installer to press the pulley-damper onto the crankshaft. Install crankshaft bolt and washer
