RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
2. Remove the wiper arms from the wiper pivots. Refer to Wiper Arm in the Removal and Installation of Wiper and Washer Systems for the
procedures.
Cowl Plenum Cover/Grille Panel Weatherstrip
3. Remove the weatherstrip along the front edge of the cowl plenum cover/grille panel and the cowl plenum panel.
Cowl Plenum Plastic Screws Remove/Install
4. Remove the plastic screws that secure the cowl plenum cover/grille panel to the studs on the cowl top panel near the base of the windshield.
5. Lift the cowl plenum cover/grille panel from the cowl top far enough to access the vacuum reservoir near the right end of the cowl plenum.