RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Tires: Procedures
Cleaning
Remove the protective coating on the tires before delivery of a vehicle. This coating may cause deterioration of the tires.
To remove the protective coating, apply warm water and let it soak for a few minutes. Afterwards, scrub the coating away with a soft bristle brush.
Steam cleaning may also be used to remove the coating.
NOTE: DO NOT use gasoline, mineral oil, oil-based solvent or a wire brush for cleaning.
Pressure Gauges
A quality air pressure gauge is recommended to check tire pressure. After checking the air pressure, replace valve cap finger tight.
