RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Fuel Rail: Service and Repair
REMOVAL
WARNING: THE FUEL SYSTEM IS UNDER A CONSTANT PRESSURE EVEN WITH THE ENGINE OFF. BEFORE SERVICING
FUEL RAIL, FUEL SYSTEM PRESSURE MUST BE RELEASED.
1. Remove negative battery cable at battery.
2. Remove air cleaner housing and tube.
3. Perform fuel pressure release procedure. Refer to Fuel Delivery System.
4. Disconnect throttle body linkage and remove throttle body from intake manifold.
Fig. 39 Ignition Coil Pack And Mounting Bracket
5. Remove ignition coil pack and bracket assembly (Fig. 39) at intake manifold and right engine valve cover (four bolts).
6. Remove upper half of intake manifold. Refer to Engines for procedures.