RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Fig. 40 Remove/Install Fuel Injector Connector
7. Disconnect electrical connectors at all fuel injectors. To remove connector refer to (Fig. 40). Push red colored slider away from injector (1). While
pushing slider, depress tab (2) and remove connector (3) from injector. The factory fuel injection wiring harness is numerically tagged (INJ 1, INJ
2, etc.) for injector position identification.
8. Disconnect fuel line quick-connect fitting at left-rear end of fuel rail. A special 3/8 inch fuel line disconnection tool will be necessary.
Fig. 41 Fuel Rail Mounting Bolts (Typical)