dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Brake Hose/ABS Wheel Sensor Replacement|Page 554 > < Recall 01V038000: Brake Hose/ABS Sensor Wire Clearance
Page 1
background image

Technical Service Bulletin # 971

Date: 010301

Recall - Brake Hose/ABS Wheel Sensor Replacement

March 2001

Dealer Service Instructions for:

Safety Recall No. 971
Front Brake Hoses and ABS Wheel Speed Sensors

Models
2000

(BR/BE) Dodge Ram 2500 Four Wheel Drive (4WD) Trucks

NOTE:

This recall applies only to the above vehicles equipped with four-wheel anti-lock brakes (ABS) (Sales Code - BGK) built at the:

St. Louis North Assembly Plant ("J" in the 11th VIN position) through September 3, 1999 (MDH 090300)

Saltillo Assembly Plant ("G" in the 11th VIN position) through

September 2, 1999 (MDH 090214)

Lago Alberto Assembly Plant ("M" in the 11th VIN position) through September 1, 1999 (MDH 090119).

IMPORTANT:

Some of the involved vehicles may be in dealer used vehicle inventory. Dealers should complete this recall service on these vehicles before retail
delivery. Dealers should also perform this recall on vehicles in for service. Involved vehicles can be determined by using the DIAL VIP System.

Subject

The front brake hoses and/or ABS wheel speed sensor wires on about 2,000 of the above vehicles may contact the front wheel or tire Prolonged brake
hose contact could wear a hole in the brake hose and cause a partial brake system loss. This could cause an accident without warning. Prolonged ABS
sensor wire contact could damage the wire and cause a loss of the ABS function.

Repair

Both front brake hose assemblies must be replaced. ABS wheel Speed sensor wires must be inspected for damage and the sensors must me replaced if
necessary.

Alternate Transportation

If inspection determines that ABS wheel speed sensor replacement is required and the vehicle must be held overnight, dealers should attempt to
minimize customer inconvenience by placing the owner in a loaner vehicle.

Parts Information

A.

Front Brake Hoses

Part Number

Description

CBA19710

Front Brake Hose Package

Each package contains the following components:

Quantity

Description

1

Front Brake Hose - Right

1

Front Brake Hose - Left

4

Copper Gaskets

Each dealer to whom vehicles in the recall were invoiced (or the current dealer at the same street address) will receive enough Front Brake Hose
Packages to service about 25% of those vehicles.

B.

ABS Wheel Speed Sensor

Due to the small number of involved vehicles expected to require ABS wheel speed sensor replacement, no ABS sensors will be distributed initially.
ABS sensors, P/N 05015882AA, should be ordered only after inspection determines that replacement is required. Very few vehicles are expected to

Recall - Brake Hose/ABS Wheel Sensor Replacement|Page 554 > < Recall 01V038000: Brake Hose/ABS Sensor Wire Clearance