RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Fig. 19
1. If exciter ring was removed, align exciter ring tab with slot in differential case (Fig. 19).
2. Invert the differential case and start two ring gear bolts. This will provide case to ring gear bolt hole alignment.
Fig. 20
3. Press the exciter ring onto the differential case using the ring gear as a pilot (Fig. 20).
4. Install new ring gear bolts and alternately tighten to 272 - 325 Nm (200 - 240 ft. lbs.) torque.