RAM 2500 Truck 4WD V10-8.0L VIN W HDC (2000)
Rear Door Window Regulator: Service and Repair
Window Regulator - Power
WINDOW REGULATOR - POWER
REMOVAL
1. Remove the waterdam.
2. Remove the window switch from the door trim panel and reconnect it to the door wire harness.
Fig. 11
3. Raise the window to the position shown and remove the two nuts attaching the glass to the window regulator. (Fig. 11)
4. Remove the stabilizer nut.
5. Disengage the door glass from the regulator lift plate and position into the full up position.
6. Secure the glass in the up position using a wood wedge or equivalent.
7. Lower the regulator.
Fig. 12