RAM 2500 Truck 4WD V8-5.2L VIN Y (2000)
Power Seat Motor: Service and Repair
Power Seat Adjuster and Motors
REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
2. Remove the seat, power seat adjuster and motors from the vehicle as a unit.
3. Unplug the power seat wire harness connectors at each of the three power seat motors.
4. Release the power seat wire harness retainers from the seat adjuster and motors assembly.
5. Remove the fasteners that secure the center seat cushion to the brackets on the power seat adjuster.
6. Remove the screws that secure the power seat adjuster and motors assembly to the seat cushion frame.
7. Remove the power seat adjuster and motors assembly from the seat cushion frame.
8. Reverse the removal procedures to install.