RAM 2500 Truck 4WD V8-5.2L VIN Y (2000)
Windshield Washer Spray Nozzle: Service and Repair
REMOVAL AND INSTALLATION
1. Remove the cowl plenum cover/grille panel from the cowl top. See Wiper Motor in the Removal and Installation for the procedures.
2. From the underside of the cowl plenum coven grille panel, disconnect the washer hose from the nozzle fitting.
3. From the underside of the cowl plenum cover/grille panel, compress the retaining tabs of the washer nozzle and push the nozzle out through the
top of the panel.
4. Reverse the removal procedures to install.