RAM 2500 Truck 4WD V8-5.2L VIN Y (2000)
Washer Supply Hose Remove/Install
6. Disconnect the windshield washer supply hose at the wye fitting.
7. Remove the cowl plenum cover/grille pane] from the vehicle and set it aside.
Wiper Module Remove/Install
8. Remove the four screws that secure the wiper module to the cowl plenum panel.
9. Move the wiper module as required to access the wiper motor wire harness connector.
Wiper Motor Wire Harness Connectors
10. Unplug the wiper motor wire harness connectors from the wiper motor.
11. Remove the wiper module from the cowl plenum.