RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Front Door Panel: Procedures
REMOVAL
1. Remove the screw (1) that secures the interior door handle (2) to the interior door handle actuator (3).
2. Remove the interior door handle from the interior door handle actuator.
3. If equipped, remove the manual window crank (1) using a window crank removal tool (2).
4. Remove the two screws (2) that secure the door trim panel (3) to the two screw inserts (1).
5. Remove the two screws (4) that secure the door trim panel to the bottom of the door.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not pull the
door trim panel directly off of the door or damage to the trim panel and/or the power switch assembly will occur.