RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Seat Track: Service and Repair
REMOVAL
1. Remove the appropriate seat from the vehicle.
2. Remove the power seat switch from the seat.
3. Remove four seat track mounting nuts from cushion pan.
4. Disconnect the power seat electrical connectors and remove the seat track from the seat cushion.
5. Remove the necessary components that must be transferred to the replacement seat track (seat belt buckles, wire harness, etc.).
INSTALLATION
1. Install the necessary components that must be transferred to the replacement seat track (seat belt buckles, wire harness, etc.).
2. Position the seat track and install the retaining nuts on the seat cushion pan studs. Torque the bolts to 25 N.m.
3. Route and connect the power seat electrical connectors on the seat track and cushion pan.
4. Install the power seat switch on the seat.
5. Install the seat in the vehicle.
6. Connect the battery negative cable.
