RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
NOTE: Identify lifters to ensure installation in original location.
17. Remove the tappets (2) and retainer (1) assembly.
18. Install a long bolt into front of camshaft to aid in removal of the camshaft. Remove camshaft, being careful not to damage cam bearings with the
cam lobes (figure 5).
INSPECTION
1. The cam bearings are not serviceable. Do not attempt to replace cam bearings for any reason.
INSTALLATION - CAMSHAFT CORE HOLE PLUG
1. Clean core hole in block.
NOTE: Do not apply adhesive to the new core hole plug. A new plug will have adhesive pre-applied.
2. Install a new core hole plug at the rear of camshaft, using suitable flat faced tool. The plug must be fully seated on the cylinder block shoulder.
INSTALLATION - CAMSHAFT
CAUTION: The 5.7L LX engine uses a unique camshaft for use with the Multi Displacement System. When installing a new camshaft, the
replacement camshaft must be compatible with the Multi Displacement System.
