RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Front Crankshaft Seal: Service and Repair
SEAL - CRANKSHAFT OIL - FRONT
REMOVAL
1. Disconnect negative cable from battery.
2. Remove accessory drive belt.
3. Drain cooling system.
4. Remove upper radiator hose.
5. Remove radiator shroud attaching fasteners.
6. Remove radiator cooling fan and shroud.
7. Remove crankshaft damper bolt.
8. Remove damper using Special Tools 8513A Insert (2) and 1023 Three Jaw Puller (1).
9. Using Special Tool 9071 (1), remove crankshaft front seal (2).
INSTALLATION
