RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Measure the resistance of the (G10) Seat Belt Switch Sense circuit between the Seat Belt Switch connector and the Instrument Cluster C3
connector.
Q: Is the resistance above 5.0 ohms?
YES: Repair the (G10) Seat Belt Switch Sense circuit for an open. Perform BODY VERIFICATION TEST - VER 1. See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
NO: Replace and configure the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. See: Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
Seat Belt Warning Indicator Always on - Standard Cab
SEAT BELT WARNING INDICATOR ALWAYS ON - STANDARD CAB
