RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
11. CHECK THE (C34) COMMON DOOR DRIVER CIRCUIT FOR A SHORT TO THE (C32) RECIRCULATION DOOR DRIVER
CIRCUIT, THE (C61) BLEND DOOR DRIVER CIRCUIT, THE (C801) MODE DOOR 1 DRIVER CIRCUIT, & THE (C29) MODE
DOOR 2 DRIVER CIRCUIT
Measure the resistance between the (C34) Common Door Driver Circuit and the (C32) Recirculation Door Driver circuit, the (C61) Blend Door
Driver circuit, the (C801) Mode Door 1 Driver circuit, and the (C29) Mode Door 2 Driver circuit in the A/C Heater Control C1 harness connector.
Q: Is the resistance below 30.0 ohms on any of the circuits?
YES: Go To 12
NO: Go To 13
12. CHECK THE DOOR DRIVER CIRCUITS WHOSE RESISTANCE WAS BELOW 30.0 OHMS IN THE PREVIOUS STEP FOR A
SHORT TO THE (C34) COMMON DOOR DRIVER CIRCUIT
Disconnect all door actuator harness connectors whose circuit resistance was below 30.0 ohms.
Measure the resistance between the (C34) Common Door Driver circuit and each applicable door driver circuit in the A/C Heater Control C1
harness connector.
Q: Is the resistance below 10k ohms on any of the circuits?
YES: Repair the door driver circuits with a resistance below 10k ohms for a short to the (C34) Common Door Driver circuit. Perform BODY
