dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagnostic Trouble Code Descriptions|Page 2996 > < Diagnostic Trouble Code Descriptions|Page 2994
Page 97
background image

DIAGNOSTIC TEST

1. LEFT REAR DOOR AJAR SWITCH SHORT TO GROUND

With the DRBIII(R) in Inputs/Outputs, read the L R DOOR AJAR SW state.
While monitoring the DRBIII(R), disconnect the Left Rear Door Latch connector.

Q:  Did the Switch State change from CLOSED to OPEN?

YES:Replace the Left Rear Door Latch. Perform BODY VERIFICATION TEST - VER 1.  See: Testing and Inspection/Diagnostic Trouble Code
Tests and Associated Procedures/Verification Tests/Body Verification Test
NO:  Go To 2

2. (G77) LEFT REAR DOOR AJAR SWITCH SENSE CIRCUIT SHORT TO GROUND

Turn the ignition off.
Disconnect the Instrument Cluster C3 harness connector.
Using a 12-volt test light connected to 12-volts, probe the (G77) Left Rear Door Ajar Switch Sense circuit and test for a short to ground.
Turn the ignition on.

Q:  Does the test light illuminate brightly?

YES:  Repair the (G77) Left Rear Door Ajar Switch Sense circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1.  See:
Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
NO:  Replace the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1.  See: Testing and Inspection/Diagnostic Trouble Code
Tests and Associated Procedures/Verification Tests/Body Verification Test

Passenger Door Ajar Circuit Open

PASSENGER DOOR AJAR CIRCUIT OPEN

Diagnostic Trouble Code Descriptions|Page 2996 > < Diagnostic Trouble Code Descriptions|Page 2994