RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
If the fuse is open, replace with proper rated fuse.
Turn the ignition on for one minute.
Turn the ignition off.
Inspect the #20 Fuse in the PDC.
Q: Is the fuse open?
YES: Repair the (F21) Fused Ignition Switch Output (Unlock/Run) circuit for a short to ground. Perform BODY VERIFICATION TEST - VER
1. See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification
Tests/Body Verification Test
NO: Go To 5
5. CHECK THE (F1) FUSED IGNITION SWITCH OUTPUT (OFF/RUN/START) CIRCUIT FOR A SHORT TO GROUND
Turn the ignition off.
Remove and inspect the #29 Fuse in the PDC.
If the fuse is open, replace with the proper rated fuse.
Turn the ignition on for 1 minute.
Turn the ignition off.
Remove and inspect the #29 Fuse in the PDC.
Q: Is the fuse open?
YES: Repair the (F1) Fused Ignition Switch Output (Run/Start) circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1.
See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body
Verification Test
NO: Go To 6
6. CHECK THE (F21) FUSED IGNITION SWITCH OUTPUT (RUN/START) CIRCUIT FOR AN OPEN