RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Disconnect the Cylinder Lock Switch connector.
Disconnect the Instrument Cluster C2 connector.
Measure the resistance of the Cylinder Lock Switch Mux circuit between the Switch connector and the Instrument Cluster connector.
Q: Is the resistance below 5.0 ohms?
YES: Replace the Instrument Cluster. Perform VTSS VERIFICATION TEST - 1A. See: Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Vehicle Theft Security Verification Tests/VTSS
Verification Test
NO: Repair the Cylinder Lock Switch Mux circuit for an open. Perform VTSS VERIFICATION TEST - 1A. See: Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Vehicle Theft Security Verification
Tests/VTSS Verification Test
