RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Compressor Clutch Relay: Service and Repair
REMOVAL
1. Disconnect and isolate the negative battery cable (1).
2. Remove the cover from the integrated power module (IPM) (2).
NOTE: Refer to the fuse and relay layout map on the inside of the IPM cover for A/C clutch relay location.
3. Remove the A/C clutch relay from the IPM.
INSTALLATION
NOTE: Refer to the fuse and relay layout map on the inside of the IPM cover for A/C clutch relay location.
1. Position the A/C clutch relay into the receptacle of the integrated power module (IPM) (2).
2. Align the A/C clutch relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals are fully
seated.
3. Install the cover onto the IPM.
4. Reconnect the negative battery cable (1).