dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering - (Power Wagon Only) Vehicle Pulls To The Right|Page 5800 > < Steering - (Power Wagon Only) Vehicle Pulls To The Right|Page 5798
Page 10
background image

2003 - 2007

(DR/DH/D1/DC)

Ram Truck (2500/3500)

NOTE

This bulletin applies to four wheel drive (4x4) 2500 and 3500 model vehicles.

SYMPTOM/CONDITION:

The customer may experience a self sustaining vibration (shimmy) felt in the front end of the vehicle after striking a bump or pothole.

DIAGNOSIS:

If the customer experiences the above condition perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS/EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

1.

Raise the vehicle on an alignment rack (drive-on lift).

2.

Verify the road tires are correctly sized and the tire tread is not excessively worn. Replace any worn tire before proceeding. Any new or old
replacement tire should be equal to the original tires that came with the vehicle when it was new. Tire wear is not covered by the vehicle warranty.

3.

Set the tire pressure for the FRONT TIRES to the following specification, regardless of the load being carried by the vehicle.

Steering - (Power Wagon Only) Vehicle Pulls To The Right|Page 5800 > < Steering - (Power Wagon Only) Vehicle Pulls To The Right|Page 5798