RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Steering Shaft Coupler: Service and Repair
Lower Steering Coupling
All LD & HD Except 4X4 HD
LOWER STEERING COUPLING
REMOVAL
ALL LD & HD EXCEPT 4X4 HD
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
NOTE: The steering column on vehicles with an automatic transmission may not be equipped with an internal locking shaft that allows the
ignition key cylinder to be locked with the key. Alternative methods of locking the steering wheel for service will have to be used.
3. Lock the steering wheel with the tire in the straight position.
4. Remove the left front tire and wheel assembly.
5. Mark both coupler connections for proper installation.
6. Remove and discard the upper coupler pinch bolt.