RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Stabilizer Link: Service and Repair
With Disconnecting Stabilizer Bar
WITH DISCONNECTING STABILIZER BAR
REMOVAL
1. Raise and support the vehicle.
2. Hold the stabilizer link (1) shafts with a wrench and remove the link nuts (3) at the stabilizer bar (2).
3. Remove the stabilizer bar link nuts from the axle brackets (3).
4. Remove the links (1) from the axle brackets (3) with Puller C-3894-A (2).
INSTALLATION
