RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
12. Install release lever and bearing in clutch housing. Verify spring clip (2) that retain lever on pivot ball (4) and release bearing (3) clips (1) on lever
(1) are installed properly.
NOTE: If release lever is installed correctly, the lever part number will be toward the bottom of the transmission and right side up. There is also a
stamped "I" in the lever which goes to the pivot ball side of the transmission.
13. Install transmission and transfer case if equipped.
14. Check fluid level in clutch master cylinder.
