RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Differential Output Shaft Bearing: Service and Repair
BEARING-AXLE
REMOVAL
1. Remove half shaft, axle shaft and seal.
2. Install axle shaft bearing Remover C-4660-A (3) in the bearing (1). Then tighten the nut (2) to spread the remover in the bearing.
3. Install bearing remove cup (1) bearing (2) and nut (3). Tighten nut (3) to draw the bearing out.
4. Inspect axle shaft tube bore for roughness and burrs.
INSTALLATION
1. Wipe the axle shaft tube bore clean.
2. Install axle shaft bearing with Installer 5063 (1) and Handle C-4171 (2).
