RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Seals and Gaskets: Service and Repair
Front Axle - C205F
Seal - Axle Shaft
SEAL-AXLE SHAFT
REMOVAL
1. Remove half shaft from vehicle.
2. Remove skid plate, if equipped.
3. Clean axle seal area.
4. Remove axle shaft o-ring.
5. Remove axle shaft.
6. Remove axle shaft seal with a small pry bar.
INSTALLATION
1. Wipe axle shaft tube bore clean.
2. Install new axle shaft seal with Installer 8402 (1).
3. Install axle shaft and half shaft.
Seal - Pinion
SEAL-PINION
REMOVAL
1. Remove both half shafts.
2. Remove front propeller shaft.
3. Rotate pinion gear three or four times and verify pinion rotates smoothly.
