RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
6. Install Extractor Rod 6310 with Extractor Foot 6310-9 (2) through the receiver and the axle seal.
7. Install Extractor Plate 6310-2 and Nut 6310-7 (2) on the extractor rod (1).
8. Tighten nut on the extractor rod and pull the seal out and into the receiver.
INSTALLATION
1. Install axle seal on Installer Cups 8885-2 (1) (3) and position cups with seals into the housing.
NOTE: Seal are installed with the axle guide facing outward.
