RAM 2500 Truck 4WD V8-5.9L VIN Z (1997)
Glove Compartment Lock: Service and Repair
Glove Box Latch Striker Replacement
REMOVAL
1. Remove the glove box lamp and switch from the latch striker mounting plate.
Glove Box Latch Striker Remove/Install
2. Remove the two screws that secure the latch striker to the instrument panel.
3. Remove the latch striker from the instrument panel.
NOTE: Tuck the wire harness that was exposed by the lamp and switch removal procedure back Into the recess behind the lamp. Do not leave the
wire harness exposed in the glove box latch area.
4. Reverse the removal procedures to install.